Size Does Matter!

So Does Breadth of Line.

As part of its commitment to provide products that meet the changing needs of specifiers and installers, Elkhart Products Corporation has added to its expanding “PUSH” line.  We now offer removable TECTITE push fittings from 1/4″ to 2″ sizes in both standard and low lead designs.  The addition of 1/4″ and 3/8″ fittings, as well as check valves, slip tees, fitting adapters, angle and straight stops, water heater hoses with integral ball valves, and water heater installation kits rounds out our product offering for the broadest size range of push fittings in the industry.


TECTITE provides easier, faster and more cost-effective jointing solutions. The fittings simply push together in seconds to create a perfect joint. No torches and no solder are required.


TECTITE fittings are removable, using a TECTITE removal tool available from EPC.


In addition, the fittings are reusable, following our new fitting installation procedures.


Benefits extend well beyond installation technique, allowing for the jointing of copper tubing, and PEX and CPVC pipe

Available in:

Small Diameter Fittings – 1/4″ to 1″

Large Diameter Fittings – 1 1/4″ to 2″

Slip/Repair Fittings

Ball Valves

Water Heater & Repair Hoses

Clean, easy and efficient. 

The jointing process is simple: no special tools, no flux, no solder, no flame.  No problem!  TECTITE offers an energy-efficient, safe, cost-effective installation.

TECTITE fittings are designed to join Copper, CPVC and PEX tube in the 1/4″” to 2″ size range.  PEX tubing requires a tube liner.

The benefits: lower costs, reduced labor time and an efficient installation process!

Superb performance. 

TECTITE fittings are perfect for potable water, hot water heating, and chilled water systems within the pressure/temperature rating.

The o-ring in all TECTITE fittings is manufactured from ethylene propylene diene monomer (EPDM) and is supplied lubricated for easy tube insertion.  Fittings are produced from either gunmetal (which is immune to dezincification), A-metal or DZR brass (which are both resistant to dezincification).

Like all Elkhart Products Corporation pipe fitting products, TECTITE fittings are designed and manufactured with the highest quality possible. TECTITE fittings go above and beyond to meet the latest industry standards.

Perfect fit. Perfect warranty. 

TECTITE fittings carry a 50-year-warranty against manufacturing defects. Contact an EPC representative for details. All warranties are subject to following good installation practices. The installation manual provides comprehensive details.

Visit Elkhart’s website to learn more about TecTite fittings, or contact one of experts today and toll-free at 888-756-4110.